Multiple Operating Modes and Multiple Time Ranges.
DIN 48 x 48-mm Multifunctional Timer.
| Output | Supply voltage | Input type | Time range | Operating mode *2 | Model *1 |
|---|---|---|---|---|---|
| Contact | 100 to 240 VAC (50/60 Hz)/ 100 to 125 VDC |
No-voltage input |
0.05 s to 300 h | Eight multi-modes: A, B, B2, C, D, E, G, J |
H3CR-A |
| 24 to 48 VAC (50/60 Hz)/ 12 to 48 VDC |
|||||
| 100 to 240 VAC (50/60 Hz)/ 100 to 125 VDC |
Voltage input | Eight multi-modes: A, B, B2, C, D, E, G, J |
H3CR-AP | ||
| 24 to 48 VAC (50/60 Hz)/ 12 to 48 VDC |
|||||
| 100 to 240 VAC (50/60 Hz)/ 100 to 125 VDC |
No-voltage input |
0.1 s to 600 h | H3CR-A-301 | ||
| 24 to 48 VAC (50/60 Hz)/ 12 to 48 VDC |
|||||
| Transistor (Photocoupler) |
24 to 48 VAC (50/60 Hz)/ 12 to 48 VDC |
0.05 s to 300 h | H3CR-AS |
| Item | H3CR-A/-AS/-A-301 | H3CR-AP | H3CR-A8/-A8S/-A8-301 | H3CR-A8E |
|---|---|---|---|---|
| Operating mode | A: ON-delay B: Flicker OFF start B2: Flicker ON start C: Signal ON/OFF-delay D: Signal OFF-delay E: Interval G: Signal ON/OFF-delay J: One-shot |
A: ON-delay (power supply start) B: Flicker OFF start (power supply start) B2: Flicker ON start (power supply start) E: Interval (power supply start) J: One-shot (power supply start) |
||
| Pin type | 11-pin | 8-pin | ||
| Input type | No-voltage input | Voltage input | --- | |
| Time-limit output type | H3CR-A/-A8/-AP/-A-301/-A8-301: Relay output (DPDT) H3CR-AS/-A8S: Transistor output (NPN/PNP universal) *1 |
Relay output (SPDT) |
||
| Instantaneous output type | --- | Relay output (SPDT) |
||
| Mounting method | DIN track mounting, surface mounting, and flush mounting | |||
| Approved standards | UL508, CSA C22.2 No.14, NK, Lloyds, CCC: GB/T 14048.5 *2 Conforms to EN61812-1 and IEC60664-1 (VDE0110) 4kV/2. Output category according to EN60947-5-1 for Timers with Contact Outputs. Output category according to EN60947-5-2 for Timers with Transistor Outputs. |
|||
You might also like
