• The PS-[]S(R) are separate Electrode Holders that allow the Electrodes to be withdrawn easily for inspection.
• The PS-[]S(R) come in 3, 4, or 5 pole models for supply and drainage of tap water in buildings.
| Model | PS-3S(R) *1 | PS-4S(R) *1 | PS-5S(R) *1 | PS-31 *2 |
| No. of Electrodes |
3 |
4 |
5 |
3 *3 |
| Material |
Resin (PBT = Polybutylene terephthalate) |
| Insulation resistance |
100 MΩ min. |
| Operating temperature |
-10 to 70°C (with no icing) |
| Operating pressure |
Atmospheric pressure |
| Applications |
Water supply and drainage control in buildings |
Limited Mounting Space |
| Electrodes |
Purchase F03-01 separately. |
Single-piece construction |
Note:
1. The Two-wire Electrode Holders (R models) have a built-in resistor of 6.8 kΩ. They should be used with the Two-wire 61F Controllers.
2. Cut the electrodes to the desired length.
3. PS-31 comes in a 3-pole model only.
Dimensions
PS-3S/-4S/-5S
PS-3SR/-4SR/-5SR
(see note)
Note: The PS-3SR, PS-4SR, and PS-5SR have built-in resistor of 6.8 kΩ and used for the two-wire 61F models.