|
| Electronics |
State of the art micro-controller
providing utmost flexibility to meet application needs |
| Standard
Inputs |
2
(moisture and temperature) |
| Optional
Input |
For
pressure transducer providing live pressure compensation
or other sensor. Signals: 0/1 to 5V, 0/4 to 20mA loop
powered, or 4 to 20 mA. If live measurement is not
available, pressure compensation can be achieved by
entering a constant pressure value in matrix location
V3HO |
| Moisture
Probe |
Interconnects
with MDR3xx probe |
| User
Interface |
Five
push-buttons, easy configuration using a matrix |
| Display |
Alpha-Numeric
LCD, displays measured value with units of measure,
matrix location and programming instructions, error
indication with error code if malfunction occurs;
user selectable scanning feature alternating the display
every 5 seconds through active channels (3 max) |
|
EMI/RFI/ESD Protection |
Full
compliance with EN 61326-1 |
| Units
of Measure (Moisture) |
rh%,
dew point °C, °F, g/m3, g/kg, Tw °C, °F
(Wet Bulb Temperature, vapor pressure in hPa, mmHg,
process pressure calculated dew point °C, °F,
rh% calculated from separate temperature value (needs
temperature measurement using the optional input) |
| Units
of Measure (Pressure) |
For
optional input used with a pressure transducer: bara,
barg, psia, psig, hPaa, hPag |
| Meaurement
Ranges |
User
Programmable |
| Analog
Outputs |
3,
each configurable to any input, 0/4 to 20 mA, load
resistance <500 Ohms, 0/1 to 5V, source resistance
249 Ohms, user selectable range, user selectable condition
in case of error to 110%, -10% or hold at last measured
value |
| Digital
Outputs |
4
relays (SPDT dry contacts rated at 250V AC, 2.5 A,
PAC = 300VA, cos phi > 0.7, P DC 100W, 100 VDC).
1 relay is system alarm. 3 relays are configurable
to any input failsafe mode: energized/de-energized
selectable, programmable hysteresis, high/low alarm
selectable |
| Serial
Output |
RS 485, sends measured values continuously |
| Serial
Communication |
RS
485, needs GEI communication software for setup or
diagnostics |
| Program |
Non
volatile memory |
| Data |
EEPROM |
| User
Interface |
Three
push-buttons for display and data manipulation |
| Cable
Entry |
Metic
cable glads M12, 2XM16, M20 |
| Operating
and Storage Temperature |
-10°C
to +50°C (14°F to 122°F) |
| Supply
Power |
85
to 275 VAC, optional 18 to 36 VDC |
| Enclosures |
Wall
mount, IP54, NEMA 12, separate connection compartment,
panel mount |
| Weight |
1
kg (2.2 lbs) |
